Skip to main content

Bottom’s Up to Clean Drinking Water!

Posted on March 22, 2018

In honor of World Water Day, today’s WatchBlog takes a look at our recent work on efforts to keep drinking water free of lead and other contaminants in homes, businesses, and military installations.

Lead in Drinking Water

No level of lead is safe in drinking water. Lead accumulates in the body over time, causing long-lasting effects, particularly for children and pregnant women. Our recent video explains how lead can enter drinking water, and what you can do to reduce your risks.

GAO: Lead in Drinking Water

 

Given how damaging lead is to the human body, what’s being done to keep it out of your drinking water?

The Environmental Protection Agency’s Lead and Copper Rule requires local water systems to monitor drinking water at locations where lead may be present and periodically obtain tap water samples. Single family homes are the highest priority. Where lead levels are too high, water systems are to take action to control corrosion, inform the public, and (in some cases) replace lead pipes. Some aspects of the rule are complex, and responsibilities for implementing it are generally shared by EPA, states and local water systems.

Figure 3: Typical Responsibilities of Key Stakeholders in Implementing the Lead and Copper Rule

Although the rule requires water systems to test in high-risk homes and buildings with lead pipes, the locations of many lead pipes are unknown. Among other things, we recommended that the EPA collect additional data on lead pipes to improve its oversight of the rule.

 

Example of Potential Lead in the Pipe Infrastructure from Source to Homes

Military Installations and Drinking Water Contamination

 

Firefighters on military installations depend on firefighting foam to stop fires, but what happens when drinking water on and around military installations is contaminated with firefighting chemicals?

DOD and EPA have found perfluorinated chemicals in drinking water at or near military installations.  These chemicals are found in firefighting foam along with other items used by DOD, like rocket propellants, and may cause cancer and other health issues. Our recent report looks at DOD’s efforts to comply with and report on its compliance with drinking water regulations.

In general, we found that DOD public water systems comply with federal and state health-based drinking water regulations. However, we found military departments did not report all violations of health-based drinking water standards to the appropriate DOD office for at least 16 installations, as required by military policy. These installations serve approximately 180,000 people.

In addition, the military departments identified 391 active and closed installations with known or suspected releases of two perfluorinated firefighting chemicals (called PFOS and PFOA) into drinking water, for which DOD initiated environmental investigations and mitigation actions, and which we describe next.

DOD’s Efforts to Cleanup Drinking Water

DOD has taken steps to limit individuals' exposure to some chemicals, including providing alternative drinking water supplies and installing water treatment systems.

Figure 1: Locations Where DOD Has Initiated Actions to Address Elevated Levels of PFOS and PFOA in Drinking Water on Military Installations, as of March 2017

Environmental investigations and mitigation activities occurred at about 67% of affected locations, where DOD spent almost $200 million. Shutting down wells, providing alternate water sources, or installing water treatment systems are all ways DOD has responded to elevated chemical levels.

 

Still, DOD's incomplete internal reporting limits its ability to monitor installation compliance with safe drinking water regulations.

 

We made 5 recommendations to improve DOD's data, reporting, and oversight of drinking water regulations.

 

For more information about GAO’s work on drinking water, visit our water quality key issues page.


Related Products

About Watchblog

GAO's mission is to provide Congress with fact-based, nonpartisan information that can help improve federal government performance and ensure accountability for the benefit of the American people. GAO launched its WatchBlog in January, 2014, as part of its continuing effort to reach its audiences—Congress and the American people—where they are currently looking for information.

The blog format allows GAO to provide a little more context about its work than it can offer on its other social media platforms. Posts will tie GAO work to current events and the news; show how GAO’s work is affecting agencies or legislation; highlight reports, testimonies, and issue areas where GAO does work; and provide information about GAO itself, among other things.

Please send any feedback on GAO's WatchBlog to blog@gao.gov.