TThis is the accessible text file for GAO report number GAO-03-1114T 
entitled 'Geospatial Information: Technologies Hold Promise for 
Wildland Fire Management, but Challenges Remain' which was released on 
August 28, 2003.

This text file was formatted by the U.S. General Accounting Office 
(GAO) to be accessible to users with visual impairments, as part of a 
longer term project to improve GAO products' accessibility. Every 
attempt has been made to maintain the structural and data integrity of 
the original printed product. Accessibility features, such as text 
descriptions of tables, consecutively numbered footnotes placed at the 
end of the file, and the text of agency comment letters, are provided 
but may not exactly duplicate the presentation or format of the printed 
version. The portable document format (PDF) file is an exact electronic 
replica of the printed version. We welcome your feedback. Please E-mail 
your comments regarding the contents or accessibility features of this 
document to Webmaster@gao.gov.

This is a work of the U.S. government and is not subject to copyright 
protection in the United States. It may be reproduced and distributed 
in its entirety without further permission from GAO. Because this work 
may contain copyrighted images or other material, permission from the 
copyright holder may be necessary if you wish to reproduce this 
material separately.

On January 4, 2004, this document was revised to add various 
footnote references missing in the text of the body of the document.

United States General Accounting Office: 

GAO: 

Testimony: 

Before a Public Forum Hosted by Representative Joel Hefley and 
Representative Mark Udall: 

For Release on Delivery: 
Expected at 1 p.m. MDT: 
Thursday, August 28, 2003: 

GEOSPATIAL INFORMATION: 

Technologies Hold Promise for Wildland Fire Management, but Challenges 
Remain: 

Statement of David A. Powner,

Acting Director, Information Technology Management Issues: 

GAO-03-1114T: 
 
GAO Highlights:

Highlights of GAO-03-1114T, a testimony before Representative Joel 
Hefley and Representative Mark Udall 

Why GAO Did This Study:

Over the past decade, a series of devastating and deadly wildland 
fires has burned millions of acres of federal forests, grasslands, and 
deserts each year, requiring federal land management agencies to spend 
hundreds of millions of dollars to fight them. GAO was asked to 
provide an interim update on key segments of an ongoing review of the 
use of geospatial information technologies in wildland fire 
management. Specifically, GAO was asked to provide an overview of key 
geospatial information technologies and their uses in different 
aspects of wildland fire management and to summarize key challenges to 
the effective use of these technologies. The final report is expected 
to be issued in September 2003. 

GAO’s review focused on the five federal agencies that are primarily 
responsible for wildland fire management: the Department of 
Agriculture’s Forest Service and the Department of the Interior’s 
National Park Service, Bureau of Land Management, Fish and Wildlife 
Service, and Bureau of Indian Affairs.

Note: The graphics in this report are in color and are best viewed 
electronically. 

What GAO Found:

Geospatial information technologies—sensors, systems, and software 
that collect, manage, manipulate, analyze, model, and display 
information about locations on the earth’s surface—can aid in managing 
wildland fires by providing accurate, detailed, and timely information 
to federal, state, and local decision makers, fire-fighting personnel, 
and the public. This information can be used to help reduce the risk 
that a fire will become uncontrollable, to respond to critical events 
while a fire is burning, and to aid in recovering from fire disasters. 
However, there are multiple challenges to effectively using these 
technologies to manage wildland fires, including challenges with data, 
systems, infrastructure, staffing, and the effective use of new 
products. Clearly, effective management of information technology and 
resources could help address these challenges. In our final report, 
due to be issued next month, we will further discuss geospatial 
information technologies, challenges to effectively using these 
technologies, and opportunities to improve the effective use of 
geospatial information technologies. We will also make recommendations 
to address these challenges and to improve the use of geospatial 
technologies in wildland fire management.

www.gao.gov/cgi-bin/getrpt?GAO-03-1114T

To view the full product, including the scope and methodology, click 
on the link above. For more information, contact David Powner at (202) 
512-9286 or pownerd@gao.gov.

[End of section]

Congressman Hefley and Congressman Udall:

We appreciate the opportunity to join in today's forum to discuss our 
ongoing work on geospatial information technologies that can be used to 
aid in wildland fire management. At your request, we will provide an 
overview of key geospatial information technologies and their uses in 
different phases of wildland fire management. We will also discuss key 
challenges to effectively using these technologies. This statement 
provides an interim update on key segments of our ongoing review of the 
use of geospatial information technologies in wildland fire management. 
We expect to issue our final report next month.

In brief, geospatial information technologies--sensors, systems, and 
software that collect, manage, manipulate, analyze, model, and display 
information about locations on the earth's surface--can aid in managing 
wildland fires by providing accurate, detailed, and timely information 
to federal, state, and local decision makers, fire-fighting personnel, 
and the public. This information can be used to help reduce the risk 
that a fire will become uncontrollable, to respond to critical events 
while a fire is burning, and to aid in recovering from fire disasters.

However, there are multiple challenges to effectively using geospatial 
technologies--all complicated by the fact that wildland fire management 
extends beyond a single agency's responsibility and requires a 
collaborative interagency approach. Key challenges include issues with 
geospatial data, systems, infrastructure, staffing, and the use of new 
products.

Clearly, effective interagency management of information resources and 
technology could help address the challenges faced by the wildland fire 
community in using geospatial information technologies. The National 
Wildfire Coordinating Group--comprising representatives from the five 
land management agencies[Footnote 1] and from other federal, state, and 
tribal organizations--has several initiatives planned or under way to 
address challenges to effectively using geospatial technologies and to 
improve the interagency management of information resources. However, 
progress on these initiatives has been slow. In our report, due to be 
issued in September 2003, we further discuss the use of geospatial 
technologies in support of wildland fire management, challenges to 
effectively using these technologies, and opportunities to address key 
challenges and to improve the effective use of geospatial technologies. 
We will also make recommendations to improve the use of geospatial 
technologies in support of wildland fire management. An overview of the 
approach we used to perform our work--our objectives, scope, and 
methodology--is provided in appendix I.

Background:

Over the past decade, there has been a series of devastating and deadly 
wildland fires on federal lands. These fires burn millions of acres of 
forests, grasslands, and deserts each year, and federal land management 
agencies spend hundreds of millions of dollars to fight them. Wildland 
fires also threaten communities that are near federal lands. During the 
2002 fire season, approximately 88,458 wildland fires burned about 6.9 
million acres and cost the federal government over $1.6 billion to 
suppress. These fires destroyed timber, natural vegetation, wildlife 
habitats, homes, and businesses, and they severely damaged forest soils 
and watershed areas for decades to come. The 2002 fires also caused the 
deaths of 23 firefighters and drove thousands of people from their 
homes. Only 2 years earlier, during the 2000 fire season, approximately 
123,000 fires had burned more than 8.4 million acres and cost the 
federal government over $2 billion.

Wildland Fire Management Life Cycle: An Overview:

Effectively managing wildland fires can be viewed in terms of a life 
cycle--there are key activities that can be performed before a fire 
starts to reduce the risk of its becoming uncontrollable; other 
activities that can take place during a fire to detect the fire before 
it gets too large and to respond to it; and still others that can be 
performed after a fire has stopped in order to stabilize, rehabilitate, 
and restore damaged forests and rangelands.

* Pre-fire activities can include identifying areas that are at risk 
for wildland fire by assessing changes in vegetation and the 
accumulation of fuels (including small trees, underbrush, and dead 
vegetation) as well as these fuels' proximity to communities; taking 
action to reduce fuels through a variety of mechanisms (including 
timber harvesting, management-ignited or prescribed fires, mechanical 
thinning, and use of natural fires); and monitoring fire weather 
conditions. Other activities during this phase can include providing 
fire preparedness training and strategically deploying equipment and 
personnel resources to at-risk areas.

* Activities that take place during a fire include detecting fires, 
dispatching resources, planning the initial attack on the fire, 
monitoring and mapping the fire's spread and behavior, and planning and 
managing subsequent attacks on the fire--if they are warranted.

* Post-fire activities can include assessing the impact of the fire, 
providing emergency stabilization of burned areas to protect life, 
property, and natural resources from post-fire degradation, such as 
flooding, contamination of a watershed area, and surface erosion; 
rehabilitating lands to remove fire debris, repair soils, and plant new 
vegetation; and monitoring the rehabilitation efforts over time to 
ensure that they are on track.

* Other activities--such as enhancing community awareness--can and 
should take place throughout the fire management life cycle.

Figure 1 depicts a fire management life cycle, with key activities in 
each phase.

Figure 1: Wildland Fire Management Activities:

[See PDF for image]

[End of figure]

Federal Land Management Responsibilities:

Five federal agencies share responsibility for managing the majority of 
our nation's federal lands--the Department of Agriculture's Forest 
Service (FS) and the Department of the Interior's National Park Service 
(NPS), Bureau of Land Management (BLM), Fish and Wildlife Service 
(FWS), and Bureau of Indian Affairs (BIA). While each agency has a 
different mission and responsibility for different areas and types of 
land, they work together to address catastrophic wildland fires, which 
often cross agency boundaries. In addition, state, local, and tribal 
governments and private individuals own thousands of acres that are 
adjacent to federal lands and are similarly susceptible to wildland 
fires. Figure 2 shows the number of acres of land managed by each of 
the five federal agencies.

Figure 2: Acres of Land Managed by Federal Land Management Agencies:

[See PDF for image]

[End of figure]

The National Fire Plan:

After years of catastrophic fires, in September 2000, the Departments 
of Agriculture and the Interior jointly issued a report on managing the 
impact of wildland fires. This report forms the basis of what is now 
known as the National Fire Plan--a long-term multibillion-dollar effort 
to address the nation's risk of wildland fires. The plan directs 
funding and attention to five key initiatives:

* Hazardous fuels reduction--investing in projects to reduce the 
buildup of fuels that leads to severe fires.

* Firefighting--ensuring adequate preparedness for future fires by 
acquiring and maintaining personnel and equipment and by placing 
firefighting resources in locations where they can most effectively be 
used to respond to fires.

* Rehabilitation and restoration--restoring landscapes and rebuilding 
ecosystems that have been damaged by wildland fires.

* Community assistance--working directly with communities to ensure 
that they are adequately protected from fires.

* Accountability--establishing mechanisms to oversee and track progress 
in implementing the National Fire Plan, which includes developing 
performance measures, processes for reporting progress, and budgeting 
information.

A key tenet of the National Fire Plan is coordination between 
government agencies at the federal, state, and local levels to develop 
strategies and carry out programs. Building on this goal of 
cooperation, the five land management agencies have worked with state 
governors and other stakeholders to develop a comprehensive strategy 
and an implementation plan for managing wildland fires, hazardous 
fuels, and ecosystem restoration and rehabilitation on federal and 
adjacent state, tribal, and private forest and rangelands in the United 
States. In developing these integrated plans and initiatives, the land 
management agencies identified other federal agencies that have roles 
in wildland fire management: agencies that manage other federal lands, 
including the Department of Defense and Department of Energy; agencies 
that research, manage, or use technologies that can aid in wildland 
fire management, including the Department of the Interior's U.S. 
Geological Survey, the National Aeronautical and Space Administration, 
the Department of Commerce's National Oceanic and Atmospheric 
Administration, and the Department of Defense's National Imagery and 
Mapping Agency; and agencies with other fire-related responsibilities, 
including the Department of Homeland Security's Federal Emergency 
Management Agency and the Environmental Protection Agency. The 
integrated plans also identify key state and local organizations that 
may collaborate on wildland fire management.

An Interagency Framework Supports the National Fire Plan:

Over the past four decades, the Departments of Agriculture and the 
Interior have established an interagency framework to handle wildland 
fire management--a framework that currently supports the National Fire 
Plan. In 1965, the Forest Service and the Bureau of Land Management 
established the National Interagency Fire Center, in Boise, Idaho. The 
fire center is the nation's principal management and logistical support 
center for wildland firefighting and now includes the five land 
management agencies, the National Weather Service, and the Department 
of the Interior's Office of Aircraft Services. The Department of 
Homeland Security's Federal Emergency Management Agency and the 
National Association of State Foresters also have a presence at the 
center. Working together, representatives from this mix of 
organizations exchange fire protection information and training 
services and coordinate and support operations for managing wildland 
fire incidents while they are occurring, throughout the United States.

In 1976, the departments established the National Wildfire Coordinating 
Group to coordinate government standards for wildland fire management 
and related programs, in order to avoid duplicating the various 
agencies' efforts and to encourage active collaboration among entities. 
This group comprises representatives from the five land management 
agencies and from other federal, state, and tribal organizations. 
Figure 3 identifies these member organizations. The coordinating group 
seeks to foster more effective execution of each agency's fire 
management program through agreements on common training, equipment, 
and other standards; however, each agency determines whether and how it 
will adopt the group's proposals. The group is organized into 15 
working teams, which focus on issues including information resource 
management (IRM), fire equipment, training, fire weather, and wildland 
fire education. Most recently, the coordinating group established the 
IRM program management office to further support the IRM working team 
by developing guidance and products. In addition, the IRM working team 
has established two subgroups to focus on specific issues involving 
geospatial information and data administration.

Figure 3: National Wildfire Coordinating Group: Member Organizations:

[See PDF for image]

[End of figure]

In recent years, we have reported that despite these interagency 
efforts, the Forest Service and the Department of the Interior had not 
established clearly defined and effective leadership for ensuring 
collaboration and coordination among the organizations that respond to 
wildland fires.[Footnote 2] Further, the National Academy of Public 
Administration recommended that the Secretaries of Agriculture and the 
Interior establish a national interagency council to achieve more 
consistent and coordinated efforts in implementing national fire 
policies and plans.[Footnote 3] In response to these concerns, in April 
2002, the Secretaries of the two departments established the Wildland 
Fire Leadership Council. This council comprises senior members of both 
departments and of key external organizations, and is supported by the 
Forest Service's National Fire Plan Coordinator and the Department of 
the Interior's Office of Wildland Fire Coordination. The Council is 
charged with providing interagency leadership and oversight to ensure 
policy coordination, accountability, and effective implementation of 
the National Fire Plan and Federal Wildland Fire Management Policy. 
Figure 4 identifies members of the Leadership Council.

Figure 4: Members of the Wildland Fire Leadership Council:

[See PDF for image]

[End of figure]

Numerous Geospatial Technologies Can Be Used to Address Different 
Aspects of Wildland Fire Management:

Geospatial information technologies--sensors, systems, and software 
that collect, manage, manipulate, analyze, model, and display 
information about positions on the earth's surface--can aid in managing 
wildland fires by providing accurate, detailed, and timely information 
to federal, state, and local decision makers, fire-fighting personnel, 
and the public. This information can be used to help reduce the risk 
that a fire will become uncontrollable, to respond to critical events 
while a fire is burning, and to aid in recovering from fire disasters.

Specific examples of geospatial technologies include remote sensing 
systems, the Global Positioning System, and geographic information 
systems. In addition, specialized software can be used in conjunction 
with remote sensing data and geographic information systems to 
manipulate geographic data and allow users to analyze, model, and 
visualize locations and events. Table 1 describes key geospatial 
technologies.

Table 1: Key Geospatial Technologies: 

Technology: Remote sensing systems; Description: Remote sensing 
systems observe data that are either emitted or reflected by the earth 
and the atmosphere, collecting these data from a distance--such as 
from a satellite or an aerial platform. Remote sensing systems involve 
different observing technologies, including cameras, scanners, radar 
and sonar systems, radiometers, lasers, and thermal devices--to name a 
few--and are capable of collecting data from one or more bands of the 
electromagnetic spectrum.[A] Data from different bands provide 
different kinds of information. For example, data observed in the 
infrared band can identify heat sources that are not observable in the 
visible band of the electromagnetic spectrum. When data are collected 
from multiple bands, a more sophisticated analysis can be performed. 
Key factors that differentiate one sensor from another include the 
type(s) of data collected, the resolutionb of the images, the width (or 
swath) of area covered on the ground, and the rate at which the 
sensor's platform revisits an area on the ground.; After being 
observed, remotely sensed data need to be processed--a function which 
can include referencing the data to a position on earth, calibrating 
them, and then transforming them into a usable format. The resulting 
product can be an image or a quantitative data product, which can in 
turn be used as an input to other geospatial technologies, including 
geographic information systems and specialized software.

Technology: Global Positioning System; Description: The Global 
Positioning System is a constellation of orbiting satellites that 
provides navigation data to military and civilian users around the 
world. These satellites orbit the earth every 12 hours, emitting 
continuous navigation signals. With the proper equipment, users can 
receive these signals and use them to calculate time, location, and 
velocity. Receivers have been developed for use on aircraft, ships, 
and land-based vehicles, as well as via mobile hand-held units. Data 
from the Global Positioning System can be used to reference remotely 
sensed aerial images or ground-based human observations to specific 
geographic coordinates, a process called geo-referencing.

Technology: Geographic information systems; Description: A geographic 
information system (GIS) 
is a system of computer software, hardware, and data used to 
manipulate, analyze, and graphically display a potentially wide array 
of information associated with geographic locations. These systems can 
receive input from remotely sensed images from satellites and aerial 
platforms, as well as from other sources including human observation, 
tabular data, and maps. These systems are capable of relating multiple 
layers of data (such as roads, vegetation, structures, and utilities) 
concerning the same geographical location and representing these 
multiple layers of information as one composite result.

Technology: Specialized software; Description: Specialized software 
for modeling, decision 
support, and visualization complements the sensing, positioning, and 
GIS technologies described above by allowing analysts and managers to 
analyze data and explore different scenarios--and thereby make better 
informed decisions. For example, fire behavior specialists use such 
software to model fire behavior. Inputs to these models come from 
satellite images as well as weather data, tabular data, and on-the-
ground observations.

Source: GAO research and analysis.

[A] A spectral band is a set of adjacent wavelengths in the 
electromagnetic spectrum. Examples include the ultraviolet, visible, 
near infrared, mid-infrared, and thermal infrared bands.

[B] Spatial resolution is a measure of the size of the smallest feature 
that can be distinguished in an image. That is, in a 30-meter 
resolution image, one could discern objects 30 meters and larger. 
Images with smaller discernable objects are considered to have higher 
resolutions.

[End of table]

While individual technologies can be used to obtain information and 
products, the integration of these technologies holds promise for 
providing even more valuable information to decision makers. For 
example, remote sensing systems provide images that are useful in their 
own right. However, when images are geo-referenced and combined with 
other layers of data in a geographic information system--and then used 
with specialized software--a more sophisticated analysis can be 
performed and more timely and sound decisions can be made. Figure 5 
provides an overview of the relationships among the different 
technologies and some resulting products.

Figure 5: Overview of the Flow of Data Among Key Geospatial Information 
Technologies and Resulting Products of These Technologies:

[See PDF for image]

[End of figure]

Federal Land Management Agencies Are Using Geospatial Technologies to 
Support Wildland Fire Management:

The geospatial information technologies mentioned above--remote 
sensing systems, the Global Positioning System, geographic information 
systems, and specialized softwarećare being used to some extent in 
managing wildland fires. These technologies are used throughout the 
wildland fire management life cycle. Key examples follow.

Examples of Geospatial Technology Use: Pre-fire:

Before a fire starts, local and regional land managers often use 
vegetation and fuels maps derived from remote sensing data in 
conjunction with a geographic information system to understand 
conditions and to identify areas for fuels treatments. Some land 
management offices have also developed software to help them assess 
risk areas and prioritize fuels treatment projects. For example, figure 
6 depicts a vegetation map, and figure 7 depicts a map showing areas 
with increased risk of fires. Interestingly, an area that the map 
identified as being at high risk of fire later burned during the Hayman 
fire of 2002.

Figure 6: Vegetation Map, Rocky Mountain Region, Colorado, August 1999:

[See PDF for image]

[End of figure]

Figure 7: Fire Hazard Map, Rocky Mountain Region, Colorado, August 
1999:

[See PDF for image]

[End of figure]

Land management agencies also use geospatial products related to the 
weather to aid in fire planning, detecting, and monitoring activities. 
Weather-based products are derived from ground-based lightning 
detection and weather observing systems as well as from fire-related 
weather predictions from the National Weather Service. Figure 8 depicts 
a seasonal fire outlook, and figure 9 depicts a fire danger map that is 
based on daily weather predictions.

Figure 8: National Wildland Fire Outlook:

[See PDF for image]

[End of figure]

Figure 9: Fire Danger Map:

[See PDF for image]

[End of figure]

Examples of Geospatial Technology Use: During-fire: 

During a fire, some fire responders use satellite and aerial imagery, 
in combination with Global Positioning System data, geographic 
information systems, and specialized fire behavior modeling software, 
to obtain information about the fire and to help plan how they will 
respond to it. For example, the Forest Service uses satellite data to 
produce images of active fires. Also, the National Interagency Fire 
Center manages an aerial infrared program that flies aircraft equipped 
with infrared sensors over large fires to detect heat and fire areas. 
These images contribute to the development of daily fire perimeter 
maps. Figure 10 depicts a satellite image of active fires. Figure 11 
depicts a satellite image of a fire perimeter, and figure 12 depicts an 
aerial infrared image and a fire perimeter map based on that image. 
Some incident teams also use fire growth modeling software to predict 
the growth of wildland fires in terms of size, intensity, and spread, 
considering variable terrain, fuels, and weather. Using this 
information, incident managers are able to estimate short-and long-term 
fire behaviors, plan for potential fires, communicate concerns and 
needs to state and local governments and the public, and request and 
position resources. Figure 13 shows the output of a fire behavior 
model. 

Figure 10: Satellite Images of Fires in Northwest United States, July 
21, 2003:

[See PDF for image]

Note: Image from NASA's Aqua satellite, Moderate Resolution Imaging 
Spectroradiometer (MODIS).

[End of figure]

Figure 11: Satellite Image Showing Early Fire Perimeters for the Rodeo 
and Chediski Fires, Arizona, June 2002: 

[See PDF for image]

Note: Image from the U.S. Geological Survey's Landsat satellite.

[End of figure]

Figure 12: An Aerial Infrared Image and Resulting Fire Perimeter Map:

[See PDF for image]

[End of figure]

Figure 13: Output of a Fire Behavior Model:

[See PDF for image]

[End of figure]

Geospatial technologies are also used to provide information on active 
fires to the general public. The wildland fire community and the U.S. 
Geological Survey established an Internet Web site, at www.geomac.gov, 
to provide access to geospatial information about active fires. This 
site allows visitors to identify the location of wildland fires on a 
broad scale and then focus in to identify information on the location 
and status of specific fires. Figure 14 shows images from the Web site.

Figure 14: Internet-Based Maps of Active Fires:

[See PDF for image]

[End of figure]

It is important to note that there are many commercial products and 
services available for use during a fire--ranging from high-resolution 
aerial and satellite imagery, to handheld Global Positioning System 
devices, to enhanced visualization models, to on-site geographic 
information systems, equipment, and personnel. Incident commanders 
responsible for responding to fires often choose to purchase commercial 
products and services to supplement interagency resources.

Examples of Geospatial Technology Use: Post-fire: 

After a fire occurs, burned-area teams have recently begun to use 
remote sensing data in conjunction with geographic information systems 
to determine the extent of fire damage and to help plan and implement 
emergency stabilization and rehabilitation efforts. Typical products 
include burn severity and burn intensity maps. Figure 15 depicts a 
satellite image and a burn severity map showing areas that have a high 
priority for emergency stabilization measures. Geospatial technologies 
also aid in monitoring rehabilitation efforts for years after a fire to 
ensure that restoration plans are on track. 

Figure 15: Burn Severity Map, Hayman Fire, June 2002:

[See PDF for image]

[End of figure]

New Uses of Geospatial Information Technologies to Aid in Wildland Fire 
Management Are under Development: 

The Forest Service and Interior are researching and developing new 
applications of geospatial information technologies to support business 
needs in wildland fire management. In addition, the Joint Fire Science 
Program, a partnership of the five land management agencies and the 
U.S. Geological Survey, funds numerous research projects each year on 
fire and fuels management. Once again, these initiatives vary greatly-
-ranging from research on remote sensing systems to the development of 
interagency information systems with geospatial components, to 
improvements in existing software models. Examples of these efforts 
include the following:

* Sensor research. Several new research projects are under way on LIDAR 
and hyperspectral sensors.[Footnote 4] For example, a BLM state office 
is researching the use of high-resolution hyperspectral and LIDAR 
imaging technologies for improving the identification of vegetation; 
planning hazardous fuels projects; and monitoring wildland urban 
interface projects, the effects of wildland fires, and fire 
rehabilitation efforts. Additionally, the Forest Service is exploring 
the use of mobile LIDAR systems for assessing smoke plumes, and it is 
conducting research on using LIDAR data, satellite data, and modeling 
techniques to forecast air quality after a fire.

* Vegetation data and tools. The five land management agencies and the 
U.S. Geological Survey are working together to develop a national 
geospatial dataset and a set of modeling tools for wildland fire 
planning. This effort, called LANDFIRE, is to provide a comprehensive 
package of spatial data layers, models, and tools needed by land and 
fire managers. The system is expected to help prioritize, plan, 
complete, and monitor fuel treatment and restoration projects on 
national, regional, and local scales. A prototype of the system covers 
central Utah and Northwestern Montana and is expected to be completed 
by April 2005.

* Interagency information systems. The five land management agencies 
are developing information systems for use by Interior and Forest 
Service offices to track efforts under the National Fire Plan. The 
National Fire Plan Operations and Reporting System is an interagency 
system designed to assist field personnel in managing and reporting 
accomplishments for work conducted under the National Fire Plan. It is 
a Web-based data collection tool with geographic information system 
(GIS) support that locates projects and treatments. It consists of 
three modules--hazardous fuels reduction, restoration and 
rehabilitation, and community assistance. While the agencies are 
currently using the system, it will not be fully operational until 
2004. Another information system, the Fire Program Analysis system, is 
an interagency planning tool for analysis and budgeting to be used by 
the five federal wildland fire management agencies. The first module--
preparedness--is scheduled for implementation in September 2004 and 
will evaluate the cost effectiveness of alternative initial attack 
operations in meeting multiple fire management objectives. Additional 
system modules are expected to provide geospatial capabilities and to 
address extended attack, large fires and national fire resources, 
hazardous fuels reduction, wildland fire use, and fire prevention.

* Improvements in existing systems. There are multiple efforts planned 
or under way to improve existing systems or to add geospatial 
components to systems that are currently under development. For 
example, researchers at a federal fire sciences laboratory are 
exploring possible improvements to the Wildland Fire Assessment System, 
an Internet-based system that provides information on a broad area of 
national fire potential and weather maps for fire managers and the 
general public. Specifically, researchers are working to develop 
products that depict moisture levels in live fuels, which will aid in 
assessing the potential for wildland fires.

The Wildland Fire Community Faces Numerous Challenges in Using 
Geospatial Information Technologies Effectively:

There are numerous challenges in using geospatial information 
technologies effectively in the wildland fire community. Key challenges 
involve data, systems, infrastructure, staffing, and the effective use 
of new products and technologies--all complicated by the fact that 
wildland fire management extends beyond a single agency's 
responsibility.

* Data issues. Users of geospatial information have noted problems in 
acquiring compatible and comprehensive geospatial data. For example, 
GIS specialists involved in fighting fires reported that they did not 
have ready access to the geospatial data they needed. They noted that 
some local jurisdictions have geospatial data, but others do not. 
Further, they reported that the data from neighboring jurisdictions are 
often incompatible. Geospatial information specialists reported that 
the first days at a wildland fire are spent trying to gather the 
geospatial information needed to accurately map the fire. While 
concerns with data availability and compatibility are often noted 
during fire incidents, these issues are also evident before and after 
fire incidents. For example, we recently reported that the five land 
management agencies did not know how effective their post-fire 
emergency stabilization and rehabilitation treatments were because, 
among other reasons, local land units do not routinely collect 
comparable information.[Footnote 5] As a result of unavailable or 
incompatible data, decision makers often lack the timely, integrated 
information they need to make sound decisions in managing different 
aspects of wildland fire.

On a related note, the development of data standards is a well-
recognized solution for addressing some of the problems mentioned 
above, but there are currently no nationally recognized geospatial data 
standards for use on fires. GIS specialists frequently cited a need for 
common, interagency geospatial data standards for use with fires. They 
noted that the land management agencies and states do not record 
information about fires--such as fire location, fire perimeter, or the 
date of different fire perimeters--in the same way.

System issues. In 1996, NWCG reported that there was a duplication of 
information systems and computer applications supporting wildland fire 
management, noting that agencies were using 15 different weather-
related software applications, 9 logistics applications, and 7 dispatch 
applications.[Footnote 6] Since that time, the number of applications 
has grown--as has the potential for duplication of effort. Duplicative 
systems not only waste limited funds, but they also make 
interoperability between systems more difficult.

This issue is complicated by the fact that there is no single, 
comprehensive inventory of information systems and applications that 
could be of use to others in the interagency wildland fire community. A 
single comprehensive inventory would allow the wildland fire community 
to identify and learn about available applications and tools, and to 
avoid duplicating efforts to develop new applications. We identified 
five different inventories of software applications--including 
information systems, models, and tools--that are currently being used 
in support of wildland fire management. While these listings are not 
limited to geospatial applications, many of the applications have 
geospatial components. The most comprehensive listing is an inventory 
managed by NWCG. 

This inventory identifies 199 applications used in support of wildland 
fire, but even this inventory is not complete. That is, it did not 
include 45 applications that were included in the other inventories. 
Additionally, it did not include 23 applications that we had 
identified. 

Infrastructure issues. Many geospatial specialists noted that there are 
problems in getting equipment, networking capabilities, and Internet 
access to the areas that need them during a fire. For example, at a 
recent fire in a remote location, geospatial specialists reported that 
they were unable to produce needed information and maps because they 
had problems with networking capabilities. Again, this issue is 
critical during a fire, when incident teams try to set up a command 
center in a remote location. However, it is also an issue when federal 
regional managers try to obtain consistent information from the 
different land management agencies' field offices before or after 
fires. The majority of local field offices have equipment to support 
geospatial information and analysis, but some do not. 

Staffing issues. Geospatial specialists noted that the training and 
qualifications of the GIS specialists who support fire incidents is not 
consistent. Specifically, officials noted that skills and 
qualifications vary widely among those who work with geographic 
information systems. For example, some GIS specialists are capable of 
interpreting infrared images as well as developing maps, but others are 
not. Some have experience working with GIS applications but are not 
specifically trained to develop GIS maps for fires. 

Use of new products. While many commercial vendors are developing 
geospatial products and services that could be of use to the wildland 
fire community--including advanced satellite and aerial imaging; GIS 
applications and equipment; and advanced mapping products including 
analyses, visualization, and modeling--many have expressed concern that 
the wildland fire community is not aware of these advancements or has 
little funding for these products. Land managers acknowledged the value 
of many of these products, but noted that they need to be driven by 
business needs. Agency officials also expressed concern that the cost 
of these products and services can be prohibitive and that licensing 
restrictions would keep them from sharing the commercial data and 
products with others in the wildland fire community. 

Clearly, effective interagency management of information resources and 
technology could help address the challenges faced by the wildland fire 
community in using geospatial information technologies. Such an 
approach could address the implementation and enforcement of national 
geospatial data standards for managing wildland fires; an interagency 
strategic approach to systems and infrastructure development; a plan 
for ensuring consistent equipment and training throughout the wildland 
fire community; and a thorough evaluation of user needs and 
opportunities for meeting those needs through new products and 
technologies.

The National Wildfire Coordinating Group--comprising representatives 
from the five land management agencies and from other federal, state, 
and tribal organizations--has several initiatives planned or under way 
to address challenges to effectively using geospatial technologies and 
to improve the interagency management of information resources. 
However, progress on these initiatives has been slow. In our report, 
due to be issued in September 2003, we further discuss the use of 
geospatial technologies in support of wildland fire management, 
challenges to effectively using these technologies, and opportunities 
to address key challenges and to improve the effective use of 
geospatial technologies. We will also make recommendations to improve 
the use of geospatial technologies in support of wildland fire 
management.

In summary, the federal wildland fire management community is using a 
variety of different geospatial technologies for activities throughout 
the fire management life cycle--including identifying dangerous fuels, 
assessing fire risks, detecting and fighting fires, and restoring fire-
damaged lands. These technologies run the gamut from satellite and 
aerial imaging, to the Global Positioning System, to geographic 
information systems, to specialized fire models. 

Local land managers and incident teams often acquire, collect, and 
develop geospatial information and technologies to meet their specific 
needs, resulting in a hodgepodge of incompatible and duplicative data 
and tools. This problem is echoed throughout the fire community, as 
those who work with different aspects of fire management commonly cite 
concerns with unavailable or incompatible geospatial data, duplicative 
systems, lack of equipment and infrastructure to access geospatial 
information, inconsistency in the training of geospatial specialists, 
and ineffective use of new products and technologies. These challenges 
illustrate the need for effective interagency management of information 
technology and resources in the wildland fire community. We will report 
on opportunities to improve the use of these technologies in our final 
report.

This concludes my statement. I would be pleased to respond to any 
questions that you may have at this time.

Contact and Acknowledgements:

If you have any questions on matters discussed in this statement, 
please contact David Powner at (202) 512-9286 or by E-mail at 
pownerd@gao.gov, or Colleen Phillips at (202) 512-6326 or by E-mail at 
phillipsc@gao.gov. Individuals making key contributions to this 
statement include Barbara Collier, Neil Doherty, Joanne Fiorino, 
Chester Joy, Richard Hung, Anjalique Lawrence, Tammi Nguyen, Megan 
Secrest, Karl Seifert, Lisa Warnecke, and Glenda Wright.

Appendix I: Objectives, Scope, and Methodology:

Our objectives were to provide an overview of key geospatial 
information technologies for addressing different aspects of wildland 
fire management and to summarize key challenges to the effective use of 
geospatial technologies in wildland fire management. To accomplish 
these objectives, we focused our review on five key federal agencies 
that are responsible for wildland fire management on public lands: the 
Department of Agriculture's Forest Service and the Department of the 
Interior's National Park Service, Bureau of Land Management, Fish and 
Wildlife Service, and Bureau of Indian Affairs. 

To identify key geospatial information technologies for addressing 
different aspects of wildland fire management, we assessed policies, 
plans, and reports on wildland fire management and technical documents 
on geospatial technologies. We assessed information on Forest Service 
and Interior efforts to develop and use geospatial technologies. We 
also interviewed officials with the Forest Service and the Interior, 
interagency organizations, commercial vendors, and selected states to 
determine the characteristics and uses of different geospatial 
technologies in supporting different phases of wildland fire 
management. In addition, we met with officials of other federal 
agencies, including the Department of the Interior's U.S. Geological 
Survey, the Department of Defense's National Imagery and Mapping 
Agency, the National Aeronautics and Space Administration, the 
Department of Commerce's National Oceanic and Atmospheric 
Administration, and the Department of Homeland Security's Federal 
Emergency Management Agency, to identify their efforts to develop 
geospatial information products in support of wildland fire management. 

To summarize key challenges to the effective use and sharing of 
geospatial technologies, we reviewed key reports and studies on these 
challenges. These include the following:

Burchfield, James A., Theron A. Miller, Lloyd Queen, Joe Frost, Dorothy 
Albright, and David DelSordo. Investigation of Geospatial Support of 
Incident Management. National Center for Landscape Fire Analysis at the 
University of Montana. November 25, 2002.

Committee on Earth Observation Satellites, Disaster Management Support 
Group. The Use of Earth Observing Satellites for Hazard Support: 
Assessments & Scenarios. National Oceanic and Atmospheric 
Administration, n.d.

Department of Agriculture (Forest Service) and Department of Interior. 
Developing an Interagency, Landscape-scale Fire Planning Analysis and 
Budget Tool. n.d. [December 2001].

Fairbanks, Frank, Elizabeth Hill, Patrick Kelly, Lyle Laverty, Keith F. 
Mulrooney, Charlie Philpot, and Charles Wise. Wildfire Suppression: 
Strategies for Containing Costs. Washington, D.C.: National Academy of 
Public Administration, September 2002.

Fairbanks, Frank, Henry Gardner, Elizabeth Hill, Keith Mulrooney, 
Charles Philpot, Karl Weick, and Charles Wise. Managing Wildland Fire: 
Enhancing Capacity to Implement the Federal Interagency Policy. 
Washington, D.C.: National Academy of Public Administration, December 
2001.

National Oceanic and Atmospheric Administration. Wildland Fire 
Management: Some Information Needs and Opportunities. Working paper, 
National Hazards Information Strategy, July 2002.

National Wildfire Coordinating Group. Information Resource Management 
Strategy Project: Wildland Fire Business Model. National Interagency 
Fire Center. August 1996.

National Wildfire Coordinating Group, Information Resource Management 
Working Team, Geospatial Task Group. Geospatial Technology for Incident 
Support: A White Paper. April 12, 2002.

We also interviewed federal officials from interagency wildland fire 
groups including the national fire directors, the National Wildfire 
Coordinating Group's (NWCG) Information Resource Management (IRM) 
working team, NWCG's IRM program management office, the IRM working 
team's geospatial task group, and the Wildland Fire Leadership Council 
to discuss challenges and ongoing efforts to address these challenges. 
In addition, we reviewed post-fire reports on the Hayman, Biscuit, and 
Cerro Grande fires to identify how geospatial technologies were used on 
these fires and to evaluate any challenges the incident teams may have 
encountered in using these technologies. We attended federal and 
commercial conferences on geospatial information technologies, 
interviewed representatives from selected states and commercial 
vendors, and observed group discussions on challenges in effectively 
using these technologies and plans for addressing them. 

We conducted our review at the federal agencies' headquarters in 
Washington D.C., the Forest Service's Remote Sensing Applications 
Center and Geospatial Service and Technology Center in Salt Lake City, 
Utah; the U.S. Geological Survey's Rocky Mountain Mapping Center in 
Denver, Colorado; the U.S. Geological Survey's Earth Resources 
Observation Systems Data Center in Sioux Falls, South Dakota; the 
National Interagency Fire Center in Boise, Idaho; and the Forest 
Service's Rocky Mountain Research Station, Fire Sciences Laboratory in 
Missoula, Montana. 

Forest Service and Interior officials generally agreed with the facts 
as presented in this statement and provided technical corrections, 
which we have incorporated. We conducted our work supporting this 
statement and our overall report between October 2002 and August 2003, 
in accordance with generally accepted government auditing standards.

(310454):

FOOTNOTES

[1] Five federal agencies are primarily responsible for wildland fire 
management: the Department of Agriculture's Forest Service and the 
Department of the Interior's National Park Service, Bureau of Land 
Management, Fish and Wildlife Service, and Bureau of Indian Affairs.

[2] U.S. General Accounting Office, The National Fire Plan: Federal 
Agencies Are Not Organized to Effectively and Efficiently Implement the 
Plan, GAO-01-1022T (Washington, D.C.: July 31, 2001); Severe Wildland 
Fires: Leadership and Accountability Needed to Reduce Risks to 
Communities and Resources, GAO-02-259 (Washington, D.C.: Jan. 31, 
2002); Wildland Fire Management: Improved Planning Will Help Agencies 
Better Identify Fire-Fighting Preparedness Needs, GAO-02-158 
(Washington, D.C.: Mar. 29, 2002).

[3] Frank Fairbanks, Henry Gardner, Elizabeth Hill, Keith Mulrooney, 
Charles Philpot, Karl Weick, and Charles Wise, Managing Wildland Fire: 
Enhancing Capacity to Implement the Federal Interagency Policy 
(Washington, D.C.: National Academy of Public Administration, December 
2001).

[4] LIDAR sensors measure the reflection of emitted light; 
hyperspectral sensors observe data in multiple contiguous channels of 
the electromagnetic spectrum.

[5] General Accounting Office, Wildland Fires: Better Information 
Needed on Effectiveness of Emergency Stabilization and Rehabilitation 
Treatments, GAO-03-430 (Washington, D.C.: Apr. 4, 2003).

[6] National Wildfire Coordinating Group, Information Resource 
Management Strategy Project: Wildland Fire Business Model (National 
Interagency Fire Center: August 1996).